Wood or Metal Studs
New work design requires a screw gun for installation.
Inner tabs allow 3/4" EMT or 1/2" EMT with reducer fitting for conduit applications if required.
Can be mounted vertically or horizontally on wood or metal studs.
Replaces electrical box in Class 2 low voltage installations.
Use with STS8 screws
|Catalog No.||Wt.Ea./Lbs.||Drywall Thickness||Box Qty|
|LVPN||0.1784||1/2" thru 5/8"||25|
|UL Certification: E492259|
Install instructions: LVPN--Low-Voltage-Plate-Rev02.pdf
Finish - Fitting: PG – Pre-galvanized Zinc
ASTM A653 G-90 Pre-galvanized zinc is produced by continuously rolling steel coils or sheets through molten zinc at the mills. The coils or sheets are slit to size and fabricated by forming, shearing or punching to produce the finished product. During fabrication cut edges are not generally zinc coated; however, the zinc near the uncoated metal becomes a sacrificial anode to protect the bare areas.